Key points
- The camera comes with a dedicated charger that’s specifically designed for the NB-11LH battery used in the ELPH 340 HS.
- Insert the small end of the charger into the charging port on the camera.
- Once the battery is fully charged, unplug the charger from the power source and disconnect it from the camera.
The Canon Powershot ELPH 340 HS is a sleek and compact camera that captures stunning images and videos. To ensure optimal performance, it’s crucial to keep its battery charged. Here’s a detailed guide on how to charge your Canon Powershot ELPH 340 HS:
1. Locate the Charging Port
The charging port is located on the side of the camera, covered by a rubber flap. Gently lift the flap to expose the port.
2. Use the Supplied Charger
The camera comes with a dedicated charger that’s specifically designed for the NB-11LH battery used in the ELPH 340 HS. Using other chargers may damage the battery or the camera.
3. Connect the Charger to the Camera
Insert the small end of the charger into the charging port on the camera. Ensure that the connection is secure.
4. Connect the Charger to a Power Source
Plug the other end of the charger into an electrical outlet. The camera will start charging immediately.
5. Monitor the Charging Status
The camera’s LCD screen will display a charging icon while the battery is charging. The icon will disappear when the battery is fully charged.
6. Disconnect the Charger
Once the battery is fully charged, unplug the charger from the power source and disconnect it from the camera.
7. Replace the Battery Flap
Close the rubber flap over the charging port to protect it from dust and moisture.
Additional Tips for Charging
- Use only the supplied charger or a compatible replacement.
- Charge the battery in a cool and dry environment.
- Avoid charging the battery for extended periods.
- If the battery is not used for a long time, it may discharge. Charge it before use.
- If the battery does not charge properly, try resetting the camera.
- If all else fails, contact Canon support for assistance.
How to Check the Battery Level
To check the battery level, turn on the camera and press the “Menu” button. Navigate to the “Battery Info” option to view the remaining battery life.
How to Extend Battery Life
- Use the camera’s power-saving mode when possible.
- Turn off the camera when not in use.
- Avoid using the flash excessively.
- Use a spare battery if you plan on taking a lot of photos or videos.
How to Replace the Battery
When the battery becomes depleted, it can be replaced with a new one. To replace the battery:
- Open the battery compartment on the bottom of the camera.
- Remove the old battery.
- Insert the new battery.
- Close the battery compartment.
Frequently Discussed Topics
Q: Can I charge the Canon Powershot ELPH 340 HS using a USB cable?
A: No, the ELPH 340 HS does not support USB charging.
Q: How long does it take to fully charge the battery?
A: The charging time depends on the remaining battery life. It typically takes around 2 hours to fully charge a depleted battery.
Q: Can I use the camera while it’s charging?
A: It’s not recommended to use the camera while it’s charging. This can damage the battery or the camera.
Q: What should I do if the battery doesn‘t charge?
A: Try resetting the camera or using a different charger. If the problem persists, contact Canon support.
Q: How often should I charge the battery?
A: Charge the battery before use or when the battery level indicator shows low.