What To Know
- To do this, connect the USB cable to the camera and plug the other end into a USB power source, such as a computer or power bank.
- Ensure that the battery charger is properly plugged into a power source and that the battery pack is correctly inserted into the charger.
- Clean the battery terminals on the camera and battery pack with a soft cloth.
The Canon PowerShot SX200 IS is a compact and versatile camera that captures stunning images and videos. To keep your camera powered up and ready for action, it’s essential to understand how to charge it correctly. This comprehensive guide will provide step-by-step instructions and troubleshooting tips to ensure your Canon PowerShot SX200 IS stays fully charged.
Step 1: Gather the Necessary Equipment
To charge your Canon PowerShot SX200 IS, you will need the following items:
- Canon PowerShot SX200 IS camera
- Battery charger (CB-2LRE)
- Battery pack (NB-6LH)
Step 2: Insert the Battery into the Charger
Locate the battery release latch on the bottom of the camera and slide it open. Gently lift the battery pack out of the camera compartment. Insert the battery pack into the battery charger, aligning the positive (+) and negative (-) terminals correctly.
Step 3: Connect the Charger to a Power Source
Plug the other end of the battery charger into a wall outlet or power strip. The charger will start charging the battery automatically.
Step 4: Monitor the Charging Status
The battery charger has an LED indicator that shows the charging status:
- Red: Charging in progress
- Green: Charging complete
Step 5: Remove the Battery from the Charger
Once the battery is fully charged, unplug the battery charger from the power source. Remove the battery pack from the charger and insert it back into the camera.
Step 6: Charge the Battery in the Camera
In certain circumstances, you may need to charge the battery while it is still inside the camera. To do this, connect the USB cable to the camera and plug the other end into a USB power source, such as a computer or power bank.
Troubleshooting
Problem: The battery charger LED indicator does not light up.
Solution: Ensure that the battery charger is properly plugged into a power source and that the battery pack is correctly inserted into the charger.
Problem: The battery is not charging.
Solution: Try using a different battery charger or battery pack. Clean the battery terminals on the camera and battery pack with a soft cloth.
Problem: The camera turns off while using it.
Solution: The battery may be running low. Charge the battery or replace it with a fully charged one.
Key Points
By following these simple steps, you can ensure that your Canon PowerShot SX200 IS is always ready to capture precious moments. Remember to charge the battery regularly to avoid any unexpected power outages. With proper charging practices, you can extend the life of your battery and keep your camera in optimal working condition.
Frequently Asked Questions
Q: How long does it take to charge the battery?
A: The charging time varies depending on the battery’s remaining charge. A fully discharged battery typically takes around 2 hours to charge.
Q: Can I use a different battery charger with my Canon PowerShot SX200 IS?
A: Yes, but it’s recommended to use the Canon-branded battery charger (CB-2LRE) for optimal performance and safety.
Q: How do I know when the battery is fully charged?
A: The battery charger‘s LED indicator will turn green when the battery is fully charged.
