Highlights
- You will hear a short beep and see the indicator light flashing, indicating that the camera is turning on.
- If you want to control the camera remotely or view live footage, you can connect it to the DJI Mimo app.
- Yes, you can use the camera as a webcam by connecting it to your computer via a USB-C cable.
The DJI Osmo Pocket is a remarkable palm-sized camera that combines portability with exceptional image quality. To unleash its full potential, you need to know how to turn it on correctly. This comprehensive guide will provide you with step-by-step instructions on how to power up your DJI Osmo Pocket effortlessly.
Step 1: Locate the Power Button
The power button is located on the front of the camera, just below the lens. It is a small, circular button with a power icon engraved on it.
Step 2: Press and Hold the Power Button
Gently press and hold the power button for approximately two seconds. You will hear a short beep and see the indicator light flashing, indicating that the camera is turning on.
Step 3: Wait for the Camera to Start Up
The camera will take a few seconds to start up. During this time, the indicator light will continue to flash. Once the camera is fully booted, the indicator light will turn solid green.
Step 4: Activate the Gimbal
Once the camera is turned on, you need to activate the gimbal to stabilize your shots. To do this, gently tilt the camera down or up. You will hear a clicking sound as the gimbal engages.
Step 5: Connect to the App (Optional)
If you want to control the camera remotely or view live footage, you can connect it to the DJI Mimo app. To do this, open the app and follow the on-screen instructions to pair your camera.
Step 6: Start Recording
To start recording, press the large red button located on the side of the camera. The indicator light will turn red while recording. To stop recording, press the button again.
Step 7: Turn Off the Camera
To turn off the camera, press and hold the power button for approximately two seconds. You will hear a short beep and see the indicator light flashing, indicating that the camera is turning off.
Troubleshooting
If you encounter any issues turning on your DJI Osmo Pocket, try the following troubleshooting steps:
- Make sure the battery is fully charged.
- Clean the power button contacts.
- Reset the camera to factory settings.
The Bottom Line
Turning on your DJI Osmo Pocket is a straightforward process that can be mastered with a few simple steps. By following the instructions outlined in this guide, you can ensure that your camera is ready to capture stunning footage at a moment’s notice. Now, go forth and unleash the creative potential of your pocket-sized wonder!
Frequently Asked Questions
Q: Why is my DJI Osmo Pocket not turning on?
A: Check if the battery is charged, clean the power button contacts, or reset the camera to factory settings.
Q: How long does it take for the DJI Osmo Pocket to start up?
A: The camera usually takes a few seconds to start up.
Q: Can I connect my DJI Osmo Pocket to a computer?
A: Yes, you can connect the camera to a computer via a USB-C cable.
Q: How do I record a time-lapse with my DJI Osmo Pocket?
A: Open the DJI Mimo app, tap the “Mode” tab, and select “Timelapse.”
Q: Can I use my DJI Osmo Pocket as a webcam?
A: Yes, you can use the camera as a webcam by connecting it to your computer via a USB-C cable.