Unmatched Outdoor Adventures Captured Through the Lens of an Experienced Homemaker

Dji Osmo App Not Working? Here’s How To Use It Without The App

Summary

  • To remove the camera, press the release button on the side of the Osmo.
  • To connect a device, use the accessory port located on the bottom of the Osmo.
  • To charge the Osmo, connect the included USB cable to the charging port on the bottom of the device.

The DJI Osmo is a remarkable handheld camera that offers exceptional versatility and creative control. While the accompanying app enhances its functionality, it’s not always necessary to rely on it. This comprehensive guide will empower you to harness the full potential of your DJI Osmo without the app.

1. Understanding the Basics

Before diving into operation, familiarize yourself with the Osmo’s physical controls:

  • Power Button: Located on the top, it turns the Osmo on/off.
  • Mode Button: Next to the Power button, it cycles through shooting modes.
  • Trigger Button: On the handle, it initiates recording or takes photos.
  • Joystick: Located on the back, it controls camera movement and menu navigation.
  • Status Indicator: A small LED on the back displays the Osmo’s status.

2. Powering On and Selecting Modes

To power on the Osmo, press and hold the Power button for a few seconds. Use the Mode button to switch between the following modes:

  • Video: Record high-quality videos.
  • Photo: Capture stunning images.
  • Time-Lapse: Create captivating time-lapse videos.
  • Slow Motion: Slow down time for dramatic effects.

3. Controlling Camera Movement

The joystick allows you to control camera movement with precision. Push it in the desired direction to pan, tilt, or roll the camera. You can also use the joystick to adjust the zoom and focus.

4. Adjusting Settings

To access camera settings, tap the Status Indicator. Use the joystick to navigate through the menu and adjust parameters such as resolution, white balance, and exposure.

5. Recording Videos

Press the Trigger button to start recording a video. The Status Indicator will turn red while recording. To stop recording, press the Trigger button again.

6. Taking Photos

To take a photo, press the Trigger button once. The Status Indicator will flash green when a photo is captured.

7. Using the Zenmuse Camera

The Osmo features a detachable Zenmuse camera that can be used independently. To remove the camera, press the release button on the side of the Osmo. The camera can be attached to a smartphone or other compatible devices for additional functionality.

8. Connecting External Devices

The Osmo supports external devices such as microphones and LED lights. To connect a device, use the accessory port located on the bottom of the Osmo.

9. Charging the Osmo

To charge the Osmo, connect the included USB cable to the charging port on the bottom of the device. The Status Indicator will turn orange while charging and turn green when fully charged.

10. Troubleshooting

  • Osmo not turning on: Check if the battery is charged.
  • Camera not responding: Reset the Osmo by pressing and holding the Power button for 10 seconds.
  • Videos not playing smoothly: Ensure you have a stable internet connection or transfer the videos to your computer for playback.

Basics You Wanted To Know

Q1: Can I use the Osmo without a smartphone or tablet?
A: Yes, you can use the Osmo independently without any external devices.

Q2: How long does the Osmo battery last?
A: The battery life varies depending on usage, but it typically lasts for around 2 hours.

Q3: Can I use the Osmo in low-light conditions?
A: Yes, the Osmo features a low-light mode that enhances visibility in dim environments.

Q4: Can I record 4K videos with the Osmo?
A: Yes, the Osmo supports 4K video recording at 30fps.

Q5: Can I create panoramas with the Osmo?
A: Yes, the Osmo has a panorama mode that allows you to capture immersive 360-degree shots.

Was this page helpful?No
K
About the Author